Xerox WorkCentre 4150

January 2016
2-72
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
09-900
Status Indicator RAPs
09-900 Invalid Drum Cartridge RAP
09-900 The machine has detected an incompatible xerographic module.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Go to the relevant procedure:
• 4150 Checkout
• 4250/4260 Checkout
• 4265 Checkout
4150 Checkout
NOTE: The main PWB has test points. The location of the test points is shown on the Main
PWB PJ location illustration.
Refer to Wiring Diagram 5. Perform the following:
1. Ensure that the xerographic module, PL 9.10 Item 1 is the correct Xerox xerographic
module for the machine.
2. Check the wiring between the CRUM PWB, PL 4.15 Item 15 and CN11 in the Main PWB.
3. Install new components as necessary:
• Xerographic module, PL 9.10 Item 1.
• CRUM PWB, PL 4.15 Item 15.
4. Perform the OF5 Main PWB Check RAP.
4250/4260 Checkout
NOTE: The main PWB has test points. The location of the test points is shown on the Main
PWB PJ location illustration.
Refer to Wiring Diagram 23. Perform the following:
1. Ensure that the xerographic module, PL 9.10 Item 1 is the correct Xerox xerographic
module for the machine.
2. Check the wiring between the xerographic module CRUM PWB and CN11 in the Main
PWB.
3. Install new components as necessary:
• Xerographic module, PL 9.10 Item 1.
• Xerographic module connector, PL 4.15 Item 35.
4. Perform the OF5 Main PWB Check RAP.
4265 Checkout
NOTE: The main PWB has test points. The location of the test points is shown on the Main
PWB PJ location illustration.
Refer to Wiring Diagram 39. Perform the following:
1. Ensure that the xerographic module, PL 9.10 Item 1 is the correct Xerox xerographic
module for the machine.
2. Check the wiring between the xerographic module CRUM PWB and CN22 in the Main
PWB.
3. Install new components as necessary:
• Xerographic module, PL 9.10 Item 1.
• Xerographic module connector, PL 4.15 Item 35.
4. Perform the OF5 Main PWB Check RAP.