Xerox WorkCentre 4150 Service Manual

January 2016
6-18
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/
GP 4
General Procedures and Information
4250/4260 System Tools
Perform the following:
1. Press the Log In/Out key.
2. Enter the customers password (default is 1111). Touch the Enter button on the UI.
3. Select the Tools tab, refer to Table 15.
NOTE: The Machine Information, Faults and Service Information tabs are accessible
without entering System Administration Tools. Go to GP 3 Machine Status.
Junk Fax Prevention Off / On Junk Fax Number List
Secure Polling Disable / Enable
Fax Reports Transmission/Receive Report / Confirmation Report / Broad-
cast Report / Multipoll Report
Auto Print / Off
Error Correction Mode Off / On
Table 13 Fax Setups
Function Level 1 Level 2 Level 3 Level 4 Level 5
Table 14 On Demand Image Overwrite
Function Level 1
On Demand Image Overwrite Start
Table 15 System administration tools
1st Level 2nd Level 3rd Level 4th Level 5th Level 6th Level
Device Settings General Energy Saver 5 to 120 Minutes - -
- - Set Date & Time mm/dd/yy / dd/mm/yy / yy/mm/
dd
--
- - - Month / Day / Year - -
- - GMT Offset -12 to 14.0 Hours - -
- - Language Default US English / Italian / Danish /
Greek / Polish / French / Dutch
/ Swedish / Russian / Hungar-
ian / German / Portuguese /
Finnish / Turkish / Romanian /
Spanish / Brazilian Portuguese
/ Norwegian / Czech / Catalan
--
- - Xerox Customer Support Customer Support Telephone
Number / Supplies Telephone
Number / Customer Asset TAG
Number / Xerox Asset TAG
Number
--
- - System Administration Reports Machine Configuration / SMTP
Log / LDAP Log / Connectivity
Log / Network Authentication
Log
--
- - - Do not Print Configuration
Report At Power On / Print
Configuration Report At Power
On
--
- - Altitude Adjustment Enable / Disable - -
- - Contention Management Priority / First In, First Out - -

Xerox WorkCentre 4150 Specifications

General

Brand	Xerox
Model	WorkCentre 4150
Category	All in One Printer
Language	English