January 2016
2-9
WorkCentre 4150/4250/4260WorkCentre WorkCentre 4150/4250/42604150/
02-100, 200
Status Indicator RAPs
02-100, 200 USB Faults RAP
02-100 The USB device is invalid. Only SCSI type memory is supported.
02-200 The USB memory is full or there is no response from the USB memory.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 20. Perform the following:
1. Make sure that the customer is using a valid USB device with sufficient free space.
2. Install a new left keys PWB, PL 2.12 Item 5.
To Next Page
Loading...
