System Settings
Xerox WorkCentre 5016/5020 User Guide 125
5 Reduce/Enlarge Ratio Select the default zoom ratio.
Note • The selectable values
change depending on the
selected measuring unit
under Metric/Inches
(menu number: 15).
Inches
0: 100%*
1: 50%
2: 78%
3: 129%
4: 200%
Metric
0: 100%*
1: 50%
2: 70%
3: 141%
4: 200%
6 Automatic Tray Switching When a tray runs out of paper
during a copy job, the machine
automatically selects another tray
that is loaded with the same size
and same orientation of paper.
This feature is called Automatic
Tray Switching.
Select whether to enable or disable
the Automatic Tray Switching
feature.
0: Disabled
1: Enabled*
7 Automatic Paper Selection
Note • This feature is only
available for the
machine equipped
with a Document
Feeder.
The Document Feeder detects the
document size, and automatically
selects paper. This feature is
called Automatic Paper Selection.
Select whether or not the
Automatic Paper Selection feature
is automatically enabled when a
document is loaded in the
Document Feeder.
0: Disabled
1: Enabled*
8 Preset Reduce/Enlarge Zoom
Ratio
Specify the preset zoom ratio for
one of the selections of the
<Reduce/Enlarge> button.
For information on the <Reduce/
Enlarge> button, refer to "<Reduce/
Enlarge> button" (P.24).
50 - 200%
(Default: 64%)
9 Sharpness (Copying) Select the default sharpness level
for copy jobs.
0: Least Sharp
1: Less Sharp
2: Normal*
3: Sharp
4: Sharpest
10 Sharpness (Scanning) Select the default sharpness level
for scan jobs.
0: Least Sharp
1: Less Sharp
2: Normal*
3: Sharp
4: Sharpest
11 Transition Time to Low Power
Mode
Select the transition time for the
machine to switch to the Low
Power Mode.
For more information on the Low
Power Mode, refer to "Low Power
Mode" (P.32).
1: 5 minutes
2: 20 minutes*
3: 60 minutes
4: 120 minutes
5: 240 minutes
254: Disable
Menu
Number
Menu Description Value
To Next Page
Loading...
Need help?
General
