Xerox WorkCentre 5020 User Manual

Multiple Account Mode
Xerox WorkCentre 5016/5020 User Guide 69
The indicator next to the <Log In/Out>
button is lit while you are logged in to
the machine.
Note • You do not need to log in to the
machine for a scan job or print job.
If you wish to run a scan job after
logging in, simply press the
<Scan> button to switch the
machine to the Scan Mode.
Multiple Account Mode
This section describes how to log in when the machine is in the Multiple Account Mode.
Logging in to the Machine
The following procedure describes how to log in when the machine is in the Multiple
Account Mode.
Note • The System Administrator’s account number is "0", and its default password is "111".
1. When the machine is in the Multiple
Account Mode, [Id] appears blinking in
the Display. Enter an account number
using the numeric keypad.
The account number that you enter
appears in the Display.
Note • The account number "1" is used as
an example in this procedure.
2. Press the <Start> button to confirm the
entered account number.
<Log In/Out>
button
Numeric keys
<Start> button

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds