Xerox WorkCentre 5020 User Manual

Cleaning the Machine
Xerox WorkCentre 5016/5020 User Guide 118
2. Turn the Document Feeder Roller to
clean it with a soft cloth moistened with
water.
Important • Do not use cleaning agents other
than water or neutral detergent.
• Use a firmly wrung cloth to avoid
water drops from falling onto the
machine. If water gets into the
machine, it may cause the machine
malfunction.
Note • If dirt does not come off easily,
gently wipe it with a soft cloth moistened with a small amount of neutral detergent.
3. Close the Document Feeder Cover until it clicks into place.
Cleaning the Corotron Wire
If any streaks, black lines, or smears appear on the output copies, cleaning the
Corotron Wire may help resolve the problem. The following procedure describes how
to clean the Corotron Wire.
1. Open the Front Cover.
2. Pull the Corotron Wire back and forth
several times.
3. Close the Front Cover.

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds