Xerox WorkCentre 5020 User Manual

Xerox WorkCentre 5016/5020 User Guide 52
5 Copying
This chapter describes the basic copying procedure and copy features available on the
machine.
Copying Procedure
This section describes the basic copy procedure.
• If the machine is in the No Account Mode, proceed to Step 1.
• If the machine is in the Single Account Mode, refer to "Logging in to the Machine"
(P.68) under "Single Account Mode" to log in to the machine before proceeding to
Step 1.
• If the machine is in the Multiple Account Mode, refer to "Logging in to the Machine"
(P.69) under "Multiple Account Mode" to log in to the machine before proceeding to
Step 1.
1. Load a document.
• When copying a document from the Document Feeder
1) Place a document face up in the
center of the Document Feeder.
Note • The indicator on the Machine
Diagram (mimic) lights up when a
document is loaded correctly in the
Document Feeder.
2) Adjust the document guides to just
touch the edges of the loaded
document.
Note • If the size of the loaded document
is smaller than any standard sizes,
the edges of the loaded document
may create shadow, and may
appear to have an outline on the
copied output.

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds