Xerox WorkCentre 5020 User Manual

Paper Jams
Xerox WorkCentre 5016/5020 User Guide 107
C2: Paper Jam in Tray 2
The following procedure describes how to clear paper jams in Tray 2 when an error
code [C2] appears in the Display.
Important • Paper Tray 2 is an optional accessory that can be used as Tray 2.
1. Pull out Tray 2 toward you.
Important • Identify the location of the paper
jam first. Randomly pulling out the
trays may tear the jammed paper,
and any torn pieces of paper
remaining in the machine may
eventually cause the machine to
malfunction.
2. Remove the jammed paper.
Note • Do not leave any torn pieces of
paper inside the machine.
3. Push Tray 2 gently back into position.
E3: Paper Jam in Tray 2
The following procedure describes how to clear paper jams in Tray 2 when an error
code [E3] appears in the Display.
Note • Paper Tray 2 is an optional accessory that can be used as Tray 2.
1. Hold the latch, and open Access Cover
2.
2. Hold the latch, and open Access Cover
1.
3. If the jammed paper is accessible
through Access Cover 1, remove the
jammed paper.

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds