Xerox WorkCentre 5020

Control Panel
Xerox WorkCentre 5016/5020 User Guide 22
<All Clear> button
Press this button to clear the previously
selected features, and to restore the default
values of the features.
<Stop> button
Press this button to cancel a job.
<Start> button
Press this button to start a copy or scan job,
and to confirm the specified values.
<Scan Completed> button
This button is selectable when using the
Document Glass with certain copy features,
such as Collate, 2-sided, and N-up.
The indicator next to the <Scan Completed>
button blinks after the first document is
scanned. The machine allows you to scan
the next document while this button is
blinking. After scanning the last document,
press this button.
<All Clear>
button
<Stop> button
<Start> button
<Scan Completed>
button