Xerox WORKCENTRE 7425 User Manual

Replacing the Drum Cartridges
WorkCentre 7425/7428/7435
User Guide
165
4. Grip the orange handle of the drum cartridge as shown and pull the drum cartridge straight out of
the printer. Place the used drum cartridge in the plastic bag and place in the box.
Warning: Do not touch any toner adhering to the drum cartridge.
Note: To return the used drum cartridge for recycling, follow the instructions included with the new
cartridge. If the instructions or shipping label are not available, go to www.xerox.com/gwa for
additional information.
5. Remove the styrofoam from the end of the new drum cartridge.
6. Rest the new cartridge, along with its black plastic protective shield, in the cartridge slot. Make sure
to load the cartridge in the direction of the arrow on the top of the shield.
7. While keeping the guides inserted in the slot, remove the black paper sheet by pulling it in the
direction shown.
8. Remove the tape from the top of the cartridge shield.
w
c
74xx-1
53
wc74xx-154
wc74xx-155

Xerox WORKCENTRE 7425 Specifications

General

Brand	Xerox
Model	WORKCENTRE 7425
Category	All in One Printer
Language	English