Setting Printing Options
WorkCentre 7425/7428/7435
User Guide
65
Macintosh Printing Options
See the following table for specific printing options in the Macintosh PostScript printer driver:
Selecting Options for an Individual Job (Macintosh)
To choose print settings for a particular job, change the driver settings before sending the job to
the printer.
1. With the document open in your application, click File, then click Print.
2. Choose your printer from the Printer list.
3. Choose the desired printing options from the drop-down lists that are displayed.
4. Click Print to print the job.
Tab Printing Options
Paper/Output Job type: Normal Print, Secure Print, Sample Set, Delay Print, Save to Mailbox
Paper: Automatically Select, Printer Default Type, Other Color, Other Type,
Transparency Separators
2-Sided Printing: 1-Sided Printing, 2-Sided Printing, 2-Sided Printing, Flip on Short
Edge
Output Color: Color, Grayscale
Output Destination: Automatically Select, Center Tray – Lower, Center Tray –
Upper, Left Top Tray
Special Pages Add Covers
Add Inserts
Add Exceptions
Image Options Lighten/Darken
Image Quality: High Quality, High Speed, High Resolution
Toner Saver: Conserve Dry Ink
CMYK Source Color: Commercial, SWOP, SNAP, EuroScale, Japan Color
Output Color Correction: Automatic, sRGB, None
Invert Image: Mirror Image
Layout/Watermark Booklet layout: Enable, Disable
Booklet Options: Scale, Gutter, Creep
Watermark: Presets, Options, New
Advanced Booklet Image Order: Left to Right, Right to Left
Banner Sheet: Enable, Disable
Request Offset: No Offset, Each Set
Tray 5 (Bypass) Feed Edge: Long Feed Edge (Normal), Short Feed Edge
To Next Page
Loading...
Need help?
General
