Printing
WorkCentre 7425/7428/7435
User Guide
62
Printing on Glossy Paper
For a listing of trays that support glossy paper, see Tray Media Compatibility on page 49.
To order paper, transparencies, or other specialty media, contact your local reseller or go to the Xerox
Supplies website for your printer: www.xerox.com/office/WC7425_WC7428_WC7435supplies.
Guidelines
• Do not open sealed packages of glossy paper until you are ready to load them into the printer.
• Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until
ready to use.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you are planning to use. Do not leave glossy paper in the
tray when you are finished printing. Reinsert unused glossy paper in the original wrapper and seal.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to
curl and jam in the printer.
• In the printer driver, touch Gloss, Gloss Reloaded, Heavyweight Gloss or Heavyweight Gloss
Reloaded as the paper type, or choose the tray loaded with the desired paper.
See also:
Supported Media Sizes and Weights on page 48
Tray Media Compatibility on page 49
To Next Page
Loading...
Need help?
General
