Copying
WorkCentre 7425/7428/7435
User Guide
90
Adjusting Copy Options
This section includes:
• Basic Settings on page 90
• Image Quality Adjustments on page 94
• Layout Adjustments on page 97
• Output Format Adjustments on page 100
• Advanced Copying on page 105
Basic Settings
Use the Copy tab to change the following basic settings:
• Selecting Color or Black & White Copies on page 90
• Reducing or Enlarging the Image on page 91
• Selecting the Tray to Use for Copies on page 91
• Specifying 2-Sided Originals for Copies on page 92
• Collating Copies on page 92
• Stapling Copies on page 93
• Folding Copies on page 93
• Hole Punching Copies on page 93
• Booklet Creation on page 93
Selecting Color or Black & White Copies
If the original document contains color, you can create copies in full color, a single color
(monochrome), or in black and white.
To select the output color:
1. Touch Copy on the touch screen.
2. Select the output color:
• Auto Detect: detects the color content in the original document, and makes copies in full color
if the original is a color document, or in black only if the original is a black and white document.
• Color: Copies in full color output using all four printing colors (cyan, magenta, yellow, and
black).
• Black & White: Copies in black and white only. Colors in the original are converted to shades of
gray.
3. For copies printed in shades of a single color:
a. Touch the Image Quality tab, then touch Color Effects.
b. Touch Single Color, then touch one of the six color choices.
c. Touch Save.
To Next Page
Loading...
Need help?
General
