Replacing the Transfer Belt Cleaner
WorkCentre 7425/7428/7435
User Guide
171
5. Pull the transfer belt cleaner straight out of the printer.
Warning: Do not touch any toner adhering to the transfer belt cleaner. Do not tilt the transfer belt
cleaner or toner may spill.
6. Place the used transfer belt cleaner in the plastic bag.
Note: For information on returning a used transfer belt cleaner, visit www.xerox.com/gwa.
7. Remove the protective cover from the new transfer belt cleaner.
Caution: Do not touch the surface of the transfer belt cleaner. Doing so may deteriorate image
quality.
wc74xx-166
wc74xx-167
wc74xx-183
To Next Page
Loading...
Need help?
General
