Xerox WORKCENTRE 7425 User Manual

Loading Media
WorkCentre 7425/7428/7435
User Guide
57
3. Before loading paper into the paper trays, fan the edges. This procedure separates any sheets of
paper that are stuck together and reduces the possibility of paper jams.
For 1-Sided printing:
• Load the paper against the left-hand side of the tray.
• Place the side to be printed facedown.
• Place pre-punched paper with the holes toward the left side of the tray.
• Place letterhead (or the top of the page) toward the front of the tray.
Note: Do not load paper above the maximum fill line. Doing so may cause paper jams.
Note: To avoid paper jams and misfeeds, do not remove paper from its packaging until required.
For 2-Sided printing:
• Place the side to be printed first (page 1) faceup.
• Place pre-punched paper with the holes toward the right side of the tray.
• Place letterhead (or the top of the page) toward the front of the tray.
4. Slide the guides so they just touch the edges of the paper.
wc74xx-191
wc74xx-192
XEROX
XEROX

Xerox WORKCENTRE 7425 Specifications

General

Brand	Xerox
Model	WORKCENTRE 7425
Category	All in One Printer
Language	English