Xerox WorkCentre Pro 423 - Page 424

03/02 Contents
WorkCentre Pro 423/428 6-7 CHAPTER 6 GENERAL
6.1.4 Fax Features
1. Applicable lines
HANA CF HANA CF
+ISDN (option)
HANA-AP
CF
HANA-AP CF
+ISDN (option)
Public telephone line
network (PSTN)
yyyy
PBX y y - -
Fax communication
network (PSTN)
yy--
Fax communication
network (ISDN)
-y--
L line (3.4kHz/2-wire type) y y - -
ISDN network 56k/64k - y y
2. Compatibility (G3)
ResolutionRemote
terminal
Standard Fine res. Super-fine
(400dpi)
Super-fine
(600dpi)
Comm.
mode
Compression
method
HANA CF 8x3.85 8x7.7 400x400 600x600 SG3/G4 JBIG
Louise CF 8x3.85 8x7.7 400x400 400x400 SG3/G4 MMR
MASHU2
CF
8x3.85 8x7.7 400x400 400x400 SG3/G4 MMR
Mashu CF 8x3.85 8x7.7 400x400 400x400 ECM/G4 MMR
Able3200G 8x3.85 8x7.7 400x400 400x400 ECM/G4 MMR
Able300G 8x3.85 8x7.7 400x400 400x400 ECM/G4 MMR
Able3010 8x3.85 8x7.7 400x400 400x400 ECM/G4 MMR
7033 8x3.85 8x7.7 300x300 300x300 ECM MMR
7036C 8x3.85 8x7.7 12x11.55 12x11.55 ECM MMR
7017 8x3.85 8x7.7 8x15.4 8x15.4 ECM MMR
7021C 8x3.85 8x7.7 8x7.7 8x7.7 ECM MR
7036/37/38 8x3.85 8x7.7 12x11.55 12x11.55 G3 MR
7008 8x3.85 8x7.7 8x15.4 8x15.4 G3 MH
Non-FX
M/Cs
(Selected
in the order
of priority
indicated
right based
on the
capability)
1) 8x3.85
2) 200x100
1) 8x7.7
2) 200x200
1) 400x400
2) 16x15.4
3) 300x300
4) 8x15.4
1) 600x600
2) 400x400
3) 16x15.4
4) 300x300
5) 8x15.4
1) SG3
2) ECM
3) G3
4) G4
1) JBIG
2) MMR
3) MR
4) MH
3. Communication mode
0. FX Unique G4
1. ITU-T G4
2. FX Unique SG3(super G3)
3. FX Unique ECM
4. FX Unique G3
5. ITU-T SG3
6. ITU-ECM
7. ITU-G3
Ref. Priority is as numbered above.
4. Picture sizes communicated
A3W(SEF), B4W(SEF), A4W(SEF)
B5 SEF is transmitted as A4 SEF. When the machine detects A4 for A5 SE, B4 for B5 SE,
or A3 for A4 SE in slow scan direction, paper sizes of A5LEF, B5LEF or A4LEF will be
selected respectively.
5. Compression method
MH/MR/MMR/JBIG
6. Communication control
ITU-T recommendation, T.30 procedure is used for fax communication for documents.
7. Non-Standard feature
Non-Standard Feature (NSF), Non-Standard Feature Control (NSC), and Non-Standard
Feature Setup (NSS) are available.
8. Transmission speed
• G4 (Optional): Up to 64kbps
• G3: 33.6K, 31.2K, 28.8K, 26.4K, 24.0K, 21.6K, 19.2K, 16.8K, 14.4K, 12.0K,
9600, 7200, 4800, 2400bps (At G3 comm, auto fallback is available.)
9. Transmission time
1) Minimum transmission time
0ms/1, 5ms/1, 10ms/1, 20ms/1, 40ms/1
2) Transmission time for picture data
G3 transmission time (TP) for picture data is as shown below. (with the standard
density. Resolution is normally not changed during send operations.)