Xerox WorkCentre Pro 423 - Page 425

WorkCentre Pro 423/428 03/02 CHAPTER 6 GENERAL
6-8 6.1 Specifications
Transmission time (Tp)Chart Mode
9600BPS 14.4KBPS 28.8KBPS 33.6KBPS
Image electronic
assoc. NO.4
Super fine
(600dpi)
Within
70 sec.
Within
48 sec.
Within
25 sec.
Within
23 sec.
Image electronic
assoc. NO.4
Super fine
(400dpi)
Within
48 sec.
Within
33 sec.
Within
18 sec.
Within
15 sec.*
Image electronic
assoc. NO.4
Fine
resolution
Within
25 sec.
Within
17 sec.
Within
10 sec.
Within
9 sec.*
Image electronic
assoc. NO.4
Standard Within
18 sec.
Within
13 sec.
Within
8 sec.
Within
7 sec.*
ITU-T(old
CCITT)NO.1
Super fine
(600dpi)
Within
40 sec.
Within
27 sec.
Within
15 sec.
Within
13 sec.
ITU-T(old
CCITT)NO.1
Super fine
(400dpi)
Within
26 sec.
Within
18 sec.
Within
10 sec.
Within
9 sec.*
ITU-T(old CCITT)
NO.1
Fine
resolution
Within
13 sec.
Within
10 sec.
Within
6 sec.
Within
5 sec.*
ITU-T(old CCITT)
NO.1
Standard Within
9 sec.
Within
7 sec.
Within
4 sec.
Within
4 sec.*
FX English Standard Within
8 sec.
Within
6 sec.
< 3 sec. < 3 sec.
FX Japanese Standard Within
9 sec.
Within
7 sec.
Within
4 sec.
Within
3 sec.*
Image electronic
assoc. NO.1
Standard
(Halftone)
Within
50 sec.
Within
20 sec.
Within
10 sec.
Within
10 sec.*
Conditions: ECM (No DATA ERROR), JBIG, On Platen input
* Reference value
10. Protocol control time (Unit: sec.)
l When no data errors occur, Protocol Control Time per phase is as shown in the table
below.
l Definition of individual control time:
Tm: Between the line closure and the time the first message training arrives.
Tn: Between the end of the previous message and the arrival of the next
message training.
Tu: Between the end of the final message and the clearing of the line.
V.17, V29,V27ter
Mode Before
message: Tm
During
message: Tn
After message:
Tu
Total
Protocol 13.9 to 16.4 3.2 4.4 21.5 to 24.0
V.34/V.8
Mode Before
message: Tm
During
message: Tn
After message:
Tu
Total
Standard Proto
8.7 to 9.9 1.0 0.9 10.6 to 11.8
6.1.5 Direct FAX Specification/Functions
Note when Fax and Printer functions installed at the same time
Specifications
Item Specifications
Send doc. size A3, B4, A4, B5(LEF), A5(LEF)
Transmission speed G3: 33.6/31.2/28.8/26.4/24.0/21.6/19.2/16.8/
14.4/12.0/9.6/7.2/4.8/2.4kbps
G4(option): 64kbps max
Transmission Time 2 sec*
1
Resolution Standard: 200x100dpi
Fine resolution: 200x200dpi
Super fine: 400x400dpi, 600x600dpi
Applicable line Public switched Telephone network (PSTN), PBX, INS
Net
64 (G3/G4 *
2
)
Band Compression
method
MH, MR, MMR, JBIG
Client PC98, DOS/V
OS Windows 95/98/Me, Windows NT 4.0, Windows 2000
Note: For Windows XP, we will inform in the near future
*1 When being equipped with ISDN Kit in optional accessories
*2 When an A4 document of about 700 characters is sent in the standard image quality
mode (8x3.85 lines /mm (28.8 kbps or more: JBIG)
Functions
Item Description
Fax number • Full dial:100 digits max
• F Code, P Code (each max: 20 digits)
• Speed Dial (Number that is programmed in WCP main unit)
• Available signs (apart from numbers 0-9) are as follows:
“-“ Pause (not available in ISDN)
“S” Specify Password
“<”, “>” Specify Port
“F” Specify F Code
“P” Specify Password for F Code
“:” Send push tones
Speed Dialling Input speed dial number that is programmed in the
WCP423/428
Broadcast
Transmission
Max: 50 stations
Confidential
Transmission
Choose a destination’s confidential box No. and the password
Delayed send Program to send a document at specified time