Xerox WorkCentre Pro 423 - Page 443

WorkCentre Pro 423/428 03/02 CHAPTER 6 GENERAL
6-26 6.7 Custom Presets
Custom Presets Chain-Function Code List (DC Area) continued
Chain Func Item Description Default
028 46 Centering 0: Disable 1: Enable 0: Disable
028 47 ROS Power Save Mode
(CE mode)
0: Slow rotation 1: Stop 0: Slow
rotation
028 48 Auto Power Off Selection
(Low power to Sleep)
45: 45 min. to 105: 105 min.
028 49 DADF JAM sensing during
copying
0: Standard
1: Max. size preset (doc. long
side sensed as 17 in.)
0: Standard
028 50 Border Erase (Top/Bottom) 0: 0mm to 50: 50mm(1mm
increment)
5: 5mm
028 51 Border Erase (Right/Left) 0: 0mm to 50: 50mm(1mm
increment)
5: 5mm
028 52 Border Erase (Center) 0: 0mm to 50: 50mm(1mm
increment)
10: 10mm
028 54 Added FAX display 1 0: None 1: Paper tray
2: Reduce/Enlarge
3: Light/Darker 4: margin
5: XY Reduce/Enlarge
6: Document Type
7: Border Erase
8: Auto Center 9: Not used
10:Bound doc.
11: Duplex copying
12: Collate 13: N in 1
14: Transparence interleaf
15: Copy Output
16: Mix size document
1
028 55 Added FAX display 2 Same as above 2
028 56 Added FAX display 3 Same as above 3
028 57 Added FAX display 4 Same as above 6
028 58 Added FAX display 5 Same as above 10
028 59 Added FAX display 6 Same as above 4
028 60 Job setting in Finisher Tray
1(Upper)
0: All disable 1: Copy enable
2: FAX enable
3: Copy and Fax enable
4: Printer enable
5: Copy and Printer enable
6: FAX and Printer enable
7: All enable
028 61 Job setting in Finisher Tray 0: All disable 1: Copy enable
2(Lower) 2: FAX enable
3: Copy and Fax enable
4: Printer enable
5: Copy and Printer enable
6: FAX and Printer enable
7: All enable
028 70 Setting to delayed printing 1 0: 0 sec. to 240: 240 sec. 10: 10 sec.
028 71 Setting to delayed printing 2 0: 0 sec. to 240: 240 sec. 6: 6 sec.
028 90 Default copying initial display
(Collate)
0: OFF F1: ON 0: OFF
028 91 Default display selection
mode
0=MENU 1=FAX 2=COPY 0: MENU
Custom Presets Chain-Function Code List (MF Area)
Chain Func Item Description Default
028 101 Memory Receive Alert 0: Disable 1: Enable 1: Enable
028 102
Adjusting Line Monitor Volume
1(Low) to 3(High) 2: Medium
028 103 Adjusting Alarm Tone 1(Low) to 3(High) 2: Medium
028 104 Adjusting tel bell volume 0: OFF 1(Low) to 3(High) 3: High
028 105 Line monitoring 0: Disable 1: Enable 1: Enable
028 108 DTMF to be monitored by
Line Monitor Speaker during
Off-Hook dialing. * CE mode
0: Line Monitor Off
1: Line Monitor On
0: Off
028 111 FAX default display
Communication Mode
1: G4 Auto 2: G3 Auto
3: 4800bps 4: Super G3
2: G3Auto
028 112 FAX default display
Resolution
1: Super fine
2: Fine
3: Standard
3: Standard
028 113 FAX default display
Density
1 to 5: Lighter to Darker 3: Normal
028 115 FAX default display
Document Type
0: Text 1: Photo
2: Text/Photo
0: Text
028 116 FAX Panel Default
Storing Send Header Name
0: OFF 1: ON 1: ON
028 117 FAX Panel Default
Halftone
0: Test 1: Photo
2: Text/Photo
0: Text
028 118 FAX Panel Default
Stamp
0: OFF 1: ON 0: OFF
028 119 FAX Panel Default
Monitor pinging
0: OFF 1: ON 0: OFF