Xerox WorkCentre Pro 423 - Page 444

03/02 Contents
WorkCentre Pro 423/428 6-27 CHAPTER 6 GENERAL
Custom Presets Chain-Function Code List (MF Area) continued
Chain Func Item Description Default
028 120 FAX Default display 0: Basic Features
1: User Customise Features
2: Feature Menu
3: Dial directory
0: Basic
028 130 Disable the copy feature
(for the customers who use
the M/C only as FAX)
0: Cannot copy
1: Can copy
1: Can copy
028 131 Delayed Power Save Mode 0: Disable Power Save Mode
1: Enable Power Save Mode
0: Disable
028 132 Disable/Enable Power Save
inhibition. *CE mode
0: Disable
1: Enable
0: Disable
028 134 Power Save time 00: 00 to 23: 59(BCD display) 21: 00
028 135 Stand-by time 00: 00 to 23: 59(BCD display) 8: 00
Custom Presets Chain-Function Code List (MF Area) continued
Chain Func Item Description Default
028 140 Added FAX display 1 0: None 1: Resolution
2: Document Type
3: Send density
4: Communication Mode
5: Document Size
6: Multi-Pages in One
7: Cover Note
8: Send Header
9: Delayed Start
10: Mailbox Communication
11: Store for poll
12: Polling
13: Monitor Report
14: Stamp
15: Duplex document
18: On-hook
1
028 141 Added FAX display 2 Same as above 2
028 142 Added FAX display 3 Same as above 3
028 143 Added FAX display 4 Same as above 4
028 144 Added FAX display 5 Same as above 7
028 145 Added FAX display 6 Same as above 13
028 150 To display “Sending” 0: Off
1: On
0: Off
028 151 Starting No. to display remote
terminal table
1 to 500 001
028 152 Unit of charge used for
calculating the number of
operator management calls
when informed by ISDN
network
0.0 units n to 255.9 units
(0xFF09)
1st byte should be the
integral No. omitting
decimals.
2nd byte should be a
decimal integral number.
10.0 yen
(0A00)
028 153 Storing 90 deg rotation on
Fax transmission or delayed
polls.
0: Off
1: On
1: Off