Xerox WorkCentre Pro 423 - Page 445

WorkCentre Pro 423/428 03/02 CHAPTER 6 GENERAL
6-28 6.8 General Information
Custom Presets Chain-Function Code List (MF Area) continued
Chain Func Item Description Default
028 154 Selection to store reduced or
100% to A4SEF when Letter
(LEF) size doc. is transmitted
by Auto Magnification on FAX
or delayed Polls
0: To store 100% mag.
1: To store reduced mag.
0: 100% mag.
028 155 Printing priority selection
• )D[UHFHLYHG
• $XWR RXWSXW RI
UHSRUWV
• /RFDOSULQWLQJ
0 to 63(0 to 0x3F)
bit0, 1: Fax received
bit2, 3: Auto output of
reports
0: Low 1: Med. 2: High
0: Low
028 160 Scanner Default display 0: Basic Features
1: User Customise Features
2: Feature Menu
3: No display
0: Basic
028 161 Added Scanner display 1 0: None
1: Resolution
2: Document Type
3: Scan density
4: Scan size
5: Scan Magnification
6: Duplex document
7: Mixed size document
1
028 162 Added Scanner display 2 Same as above 2
028 163 Added Scanner display 3 Same as above 3
028 164 Added Scanner display 4 Same as above 4
028 165 Added Scanner display 5 Same as above 5
028 166 Added Scanner display 6 Same as above 7
028 167 Scanner Default display
Resolution
1: 600dpi 2: 400dpi
3: 300dpi 4: 200dpi
4: 200dpi
028 168 Scanner Default display
Document Type
0: Text 1: Photo
2: Text/Photo
0: Text
028 169 Scanner Default display
Scan density
1 to 5: Light to Dark 3: Normal
028 170 Broadcast check display 0: Off 1: On 0: Off
028 171 FAX Default display
Manual send/receive
0: Receive 1: Send 0: Receive
028 172 FAX Default display
Receiving mode
0: Auto receive
1: Manual receive
0: Auto
receive
028 173 FAX Default display
Mixed size
0: OFF 1: ON 0: OFF
6.7.2 How to change Custom Presets in User mode
1. Select “Custom Presets” in menu.
2. Select the Item to be changed.
3. Select “Enter / Change”.
4. Select the setting value, then press “Save”.
5. Press “Clear All” to return the default display.