03/02 8.4 Offset Output Kit
WorkCentre Pro 423/428 8-9 CHAPTER 8 ACCESSORIES
(Figure-3) j0hn8012
6. Install the OCT Assembly. (Figure-4)
1) Install the OCT Assembly.
2) Pull out the Rear Upper Rail.
3) Tighten the Screw.
4) Tighten the Screws (2).
5) Tighten the Screws (2).
6) Connect the Connectors (2).
(Figure-4) j0hn8013
To Next Page
Loading...
