Xerox WorkCentre Pro 423 - Page 70

WorkCentre Pro 423/428 2-38 CHAPTER 2 TROUBLESHOOTING
03/02 2.3 Level 2 Troubleshooting
Signal Description
RM.SRR
[Note1]
Supplementary information 1
[Note2]
Supplementary information 2
[Note3]
Supplementary information 3
[Error]
Error/emergency occurrence
[event]
Event information
[V34Ph2]
Line Probing
[V34Ph3]
Equalizer Training
[V34Ph4]
Parameter replacement
[DIAL]
Dial information
[TELCNT]
Line connection(on calls)
[TXCNT]
Line connection(at auto calls)
[RXCNT]
Line connection(on receiving calls)
[DISCNT]
Line disconnection
TRCINFO
Tracing information
[G3mCom]
G3Module command
[ScmCom]
System command
AlmAInd
Alarm abandon indication
AlmARes
Alarm abandon response
AlmSInd
Alarm start indication
AlmSRes
Alarm start response
CalEInd
Call end indication
CallStts
Call status
CmlOReq
CML OFF request
DialCon
Dial confirmation
DialReq
Dial request
HkOffDt
Hook-off detection
HkOnDt
Hook-on detection
LnHAInd
Line hold abandon indication
LnHdInd
Line hold indication
LnHdRes
Line hold response
MemRCon
Memory read confirmation
MemRReq
Memory read request
SttsInd
Communication Status indication
SttsReq
Communication Status request
TnDBInd
Tone detection B indication
TnDBRes
Tone detection B response
TnDRes
Tone detection response
TnDtInd
Tone detection indication
TnSBCon
Tone send B confirmation
TnSBReq
Tone send B request
Signal Description
TnSConf
Tone send confirmation
TnSReq
Tone send request
TrcCon
Trace confirmation
TrcReq
Trace request
SlpReq
Sleep transition request
SlpCon
Sleep transition confirmation
ExCaReq
Extension capability information request
ExCaRes
Extension capability information response
ExCaCon
Extension capability information confirmation
ExCaInd
Extension capability information indication