Xilinx HW-130 - Exit (File Menu); Load Master (Options Menu)

Command Reference
HW-130 Programmer User Guide 3-7
Figure 3-8 Diagnostics Dialog Box
Exit (File Menu)
Use this command to exit the HW-130 Programmer window.
Load Master (Options Menu)
Use this command to load the contents of a programmed device into
the programmer memory. You can then use the data to program
another device. This command is available after you have specified a
device type.
Figure 3-9 Load Master Toolbar Button
After loading the master device, the program updates the
appropriate field on the display: Pass if the operation was successful,
or Fail if the operation failed.