Getting Started
HW-130 Programmer User Guide 1-17
Selecting Commands and Dialog Box Options
To choose a menu item or an option in a dialog box, you can use the
mouse or the keyboard.
Using the Mouse
Use the following guidelines when using the mouse to select menu
options or dialog box options.
1. Move the mouse pointer over a toolbar button or a menu name
and click on the left mouse button to select the object.
If you clicked on a toolbar button, a list box or a dialog box
appears if appropriate. If you clicked on a menu, menu options
are displayed.
2. Click on the option you want to use.
3. To exit a list box or a dialog box without selecting anything, press
Cancel. To exit a dialog box you can also double-click on the
upper left corner of the dialog box.
Using the Keyboard
Use the following guidelines when using the keyboard to select menu
options or dialog box options.
1. To choose a menu item, first select a menu by pressing the Alt key
and the highlighted letter key for that menu.
Note: On a workstation, use the F10 function key instead of the Alt
key to select the first menu, then use the arrow keys to select the other
menus.
The menu options are displayed.
2. Use the arrow keys to scroll down the list of menu or list items.
The status bar describes the option that is currently highlighted.
3. Press Enter when the option you want to use is highlighted or
type the underlined letter in the menu item name.
4. To exit a list box or dialog box without selecting anything, press
Escape or use Tab to position the cursor on the Cancel button and
press the Enter key.
To Next Page