Xilinx HW-130 - Quick-Key Reference

HW-130 Programmer User Guide
A-2 Xilinx Development System
Quick-Key Reference
To select command buttons, use the Tab key or press the appropriate
quick key from the list displayed in Table A-2. The table lists all the
programmer quick keys you can use as an alternative to the
command buttons.
1. To select a quick key, locate a programmer operation and its
corresponding quick key in Table A-2.
2. Hold down the Ctrl key while you press the other key indicated.
For example, type Ctrl-P to select the Program Device button.
Table A-2 Programming Quick Keys
Programmer Operation Quick Key
Device Select Ctrl-D
Design File Ctrl-F
Quantity Ctrl-Q
Program Device Ctrl-P
Load Device Ctrl-L
Verify Device Ctrl-V
Blank Check Ctrl-B
Device Checksum Ctrl-K
Signature String Ctrl-S
Create a File Ctrl-C
Append Data Ctrl-A
Cancel ESC
Exit Ctrl-X