Xtramus NuStreams-P5G - Page 55

55
E-mail: sales@xtramus.com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®
VLAN Setting
 LAN VLAN Tag: Add VLAN tags to all LAN packets.
 LAN VLAN ID: VLAN ID for LAN.
 WAN VLAN Tag: Add VLAN tags to all WAN packets
 WAN VLAN ID: VLAN ID for WAN.
Test Traffic
 Packet Length: Length of testing packets.
 Flow Control: When Flow Control is enabled, the
transmitting rate will drop if traffic overflow occurs.
 Test Time: The duration of time for DUT test.
 WAN to LAN Utilization (%): The traffic flow ratio from
WAN to LAN, presented in percentage (1~99).
 Test Delay: When enabled, NuSet-MiniPG-Config will
halt for the set amount of time before starting DUT test.
 LAN to WAN Utilization (%): The traffic flow ratio from
LAN to WAN, presented in percentage (1~99).
Pass/Fail Criteria
 Loss Tolerance (pkts): The acceptable number of lost
packets in data transmitting during tests (0~9999).
 Excess Tolerance (pkts): The acceptable number of
excess packets in data transmitting during tests
(0~9999).
Apply Run
 Click this button to apply all the settings you’ve made and save the settings to NuStreams-P5G/P9A.