Xylem Sontek River Surveyor RS5 - Page 147

SonTek RS5 User Manual (August 2020) 147
VtgTmgTrue
$GPVTG true course made good for each high frequency GPS
sample (degrees)
NS x 50
Setup Structure
Parameter Name
Description
Size
sensorDepth
Transducer depth (m)
NA
screeningDistance
Vertical screening distance (m)
NA
userSalinity
User input salinity (pss)
NA
magneticDeclination
Magnetic Declination (degrees)
NA
offsetX
GPS Antenna Offset (X)
NA
offsetY
GPS Antenna Offset (Y)
NA
coordinateSystem
Coordinate system (0 = Beam; 1 = XYZ; 2 = ENU)
NA
trackReference
Track reference (0 = System; 1 = Bottom Track; 2 =
GPS GGA; 3 = GPS VTG)
NA
depthReference
Depth reference (0 = Vertical beam; 1 = Bottom
Track)
NA
startEdge
Start edge (0 = Left bank; 1 = Right bank)
NA
Edges_0__DistanceToBank
Left Edge: Distance to the bank
NA
Edges_0__EstimatedQ
Left Edge: Estimated discharge
NA
Edges_0__Method
Left Edge: Method (0 = User input discharge; 1 =
Vertical bank; 2 = Sloped bank)
NA
Edges_1__DistanceToBank
Right Edge: Distance to the bank
NA
Edges_1__EstimatedQ
Right Edge: Estimated discharge
NA
Edges_1__Method
Right Edge: Method (0 = User input discharge; 1 =
Vertical bank; 2 = Sloped bank)
NA
extrapolation_Top_nFitType
Profile Extrapolation - Top: Fit equation type (0 =
Constant fit; 1 = Power fit)
NA
extrapolation_Top_nEntireProfil
Profile Extrapolation - Top: Fit (0 = Use entire profile;
1 = User selected number of cells)
NA
extrapolation_Top_dExponent
Profile Extrapolation - Top: Power fit exponent
NA
extrapolation_Top_nCells
Profile Extrapolation - Top: Number of cells used in
extrapolation
NA
Extrapolation_Top_nPercentage
Empty – not used
NA
extrapolation_Bottom_nFitType
Profile Extrapolation - Bottom: Fit equation type (0 =
Constant fit; 1 = Power fit)
NA
extrapolation_Bottom_nEntirePro
Profile Extrapolation - Bottom: Fit (0 = Use entire
pro-file; 1 = User selected number of cells)
NA
extrapolation_Bottom_dExponent
Profile Extrapolation - Bottom: Power fit exponent
NA
extrapolation_Bottom_nCells
Profile Extrapolation - Bottom: Number of cells used
in extrapolation
NA
Extrapolation_Bottom_nPercentage
Percentage of profile to apply the bottom
extrapolation
NA
extrapolation_nDiscardType
Method for discarding cells at the bottom of the pro-
file (0 = user selected number of cells; 1 = percent-
age of profile)
NA
extrapolation_nDiscardCells
Number of cells discarded
NA
extrapolation_dDiscardPercent
Percentage of profile discarded
NA
headingCorrection
Empty – not used
NA
hdtHeadingCorrection
Empty – not used
NA
headingSource
Empty – not used
NA