Yaesu FT-710 - Linear Amplifier Interconnections; VL-1000 Linear Amplifier Interconnections

11
Linear Amplier Interconnections
Be sure that both the FT-710 and VL-1000 are turned OFF, and then follow the installation recommendations
contained in the bellow illustration.
• VL-1000 Linear Amplier Interconnections
• Refer to the VL-1000 Operating Manual for details regarding amplier operation.
• Do not attempt to connect or disconnect coaxial cables when your hands are wet.
DC IN
ANT
ALC 1BAND-DATA 1
GND
CONTROL
DC 48V IN
ANT 1 ANT 2 ANT 3
INPUT 1
Coaxial Cable (50 ohm)
Connect to “INPUT 1” of the VL-1000
HF/50MHz Antenna
REM/ALC
GND
TUNER/LINEAR
“CT-58” ALC Cable (option)
“CT-58” Band Data Cable (option)