CW SETTING
- KEYER -
KEYER TYPE
Function: Selects the desired keyer operation
mode for the device connected to the
rear panel KEY jack.
Available Values: OFF / BUG / ELEKEY-A/
ELEKEY-B / ELEKEY-Y / ACS
Default Setting: ELEKEY-B
Description:
OFF: Disables the keyer function.
BUG: Functions as a “BUG key”. Only the
“Dot” side is automatically generated
(the “Dash” side is generated manu-
ally).
ELEKEY-A: A code element (“Dot” or “Dash” side)
is transmitted upon pressing both
sides of the paddle.
ELEKEY-B: Pressing both sides of the paddle
transmits the currently generated
“Dash” side followed by “Dot” side (or
reverse order).
ELEKEY-Y: Pressing both sides of the paddle
transmits the currently generated
“Dash” side followed by “Dot” side (or
reverse order).
While transmitting the “Dash” side,
the rst transmitted “Dot” side will not
be stored.
ACS: Functions as the “Keyer with auto-
matic spacing control feature” which
sets spacing between characters
precisely to be the same length as a
dash (three dots in length).
KEYER DOT/DASH
Function: Selects the keyer paddle wiring
configuration for the KEY jack on the
front panel.
Available Values: NOR / REV
Default Setting: NOR
Description:
NOR: Tip = Dot, Ring = Dash, Shaft = Ground.
REV: Tip = Dash, Ring = Dot, Shaft = Ground.
CW WEIGHT
Function: Adjusts the keyer CW weight.
Available Values: 2.5 - 4.5
Default Setting: 3.0
Description: Sets the “Dot”:“Dash” ratio for the
built-in electronic keyer.
NUMBER STYLE
Function: Selects the contest number “Cut” for-
mat for an imbedded contest number.
Available Values: 1290 / AUNO / AUNT / A2NO /
A2NT / 12NO / 12NT
Default Setting: 1290
Description: Abbreviates numbers “One”, “Two”,
“Nine” and “Zero” using Morse code
when sending the contest number.
1290: Does not abbreviate the contest number.
AUNO: Abbreviates to “A” for “One”, “U” for “Two”,
“N” for “Nine”, and “O” for “Zero”.
AUNT: Abbreviates to “A” for “One”, “U” for “Two”,
“N” for “Nine”, and “T” for “Zero”.
A2NO: Abbreviates to “A” for “One”, “N” for “Nine”,
and “O” for “Zero”. Does not abbreviate
number “Two”.
A2NT: Abbreviates to “A” for “One”, “N” for “Nine”,
and “T” for “Zero”. Does not abbreviate
number “Two”.
12NO: Abbreviates to “N” for “Nine”, and “O”
for “Zero”. Does not abbreviate numbers
“One” and “Two”.
12NT: Abbreviates to “N” for “Nine”, and “T” for
“Zero”. Does not abbreviate numbers
“One” and “Two”.
CONTEST NUMBER
Function: Enters the initial contest number that
will increment/decrement each time the
CW message is sent during contest
QSOs.
Available Values: 1 - 9999
Default Setting: 1
CW MEMORY 1
Function: Selects the registration method for the
contest keyer “CW MEMORY 1”.
Available Values: TEXT / MESSAGE
Default Setting: TEXT
Description:
TEXT: Use the optional FH-2 or the touch
panel to enter text (page 53).
MESSAGE: Use the keyer to register text to the
contest memory keyer (page 51).
CW MEMORY 2
Function: Selects the registration method for the
contest keyer “CW MEMORY 2”.
Available Values: TEXT / MESSAGE
Default Setting: TEXT
Description:
TEXT: Use the optional FH-2 or the touch
panel to enter text (page 53).
MESSAGE: Use the keyer to register text to the
contest memory keyer (page 51).
88
To Next Page
Loading...
