Yamaha EF7000 - Piston, Camshaft, Crankcase, and Crankshaft; Crankcase

3-18
ENG
PISTON, CAMSHAFT, CRANKCASE, AND
CRANKSHAFT
1
2
3
4
4
5
6
10 Nm (1.0 m · kgf, 7.2 ft · lbf)
7 Nm (0.7 m · kgf, 5.1 ft · lbf)
27 Nm (2.7 m · kgf, 20 ft · lbf)
12 Nm (1.2 m · kgf, 8.7 ft · lbf)
30 Nm (3.0 m · kgf, 22 ft · lbf)
1st
2nd
27 Nm (2.7 m · kgf, 20 ft · lbf)
10 Nm (1.0 m · kgf, 7.2 ft · lbf)
Order Job/Parts to remove Q’ty Remarks
Removing the crankcase Remove the parts in the order listed.
Engine assembly Refer to “ENGINE” on 3-12.
Generator assembly Refer to “GENERATOR” on 3-13.
Cylinder head assembly Refer to “CYLINDER HEAD COVER,
CYLINDER HEAD” in 7VB-F8197-E0
chapter 3.
Flywheel Refer to “FLYWHEEL” in 7VB-F8197-E0
chapter 3.
1 Crankcase cover 1
2 Oil filler cap 1
3 Gasket 1
4 Dowel pin 2
5 Clamp 1
6 Oil level switch 1
PISTON, CAMSHAFT, CRANKCASE, AND CRANKSHAFT
CRANKCASE