En 105
SETUP
Configuring input sources (Input menu)
■
Setting the interlock functions with iPod/
iPhone (when the receiver of the Wireless
System for iPod is connected)
iPod Interlock
This unit can be automatically operated in conjunction with
operations on iPod when the receiver of the Wireless System for
iPod is connected to this unit.
■
Outputting a video signal input from
another input source while playing a
multi-channel audio signal
Video Out
When “MULTI CH” is selected as the input source, a video signal
input from another terminal can be output to the video monitor. For
example, even if an audio and video component such as a DVD
player that does not support a multi-channel digital audio output,
the video signal can be output to the video monitor while
reproducing a multi-channel analog audio signal.
Power & Input Starting playback of iPod/iPhone turns on this unit
and switches the input source to DOCK (iPod)
automatically when this item is set to “On.” This unit
automatically enters standby mode when iPod/iPhone
is not operated for a while after playback is stopped.
This interlock function is disable with “Off.”
Volume Adjusting the volume on the iPod/iPhone also adjusts
the volume of this unit when this item is set to “On.”
This interlock function is disable with “Off.”
To Next Page
Loading...
Need help?
General