Yamaha RX-A3000 User Manual

SETUP
Setting various functions (Setup menu)
En 116
Power Amp Assign
In addition to the 7.1-channel speaker connection, various speaker
configurations are possible using the presence speakers connection,
bi-amp connection or multi-zone function (☞p. 20, p. 21).
Configuration
Displays the speakers connected to this unit or adjusts the output
characteristics of the speakers.
Front
Selects the size (sound reproduction capacity) of the front
speakers. J1
7ch Normal Enables the normal 7-channel speakers and front
presence speakers (☞p. 16).
7ch +1ZONE Enables the normal 7-channel speakers and zone2 or
zone3 speakers (☞p. 18).
The Zone assigned to EXTRA SP1 can be selected
from Zone2 or Zone3.
7ch +2ZONE Enables the normal 7-channel, Zone2 and Zone3
speakers (☞p. 19).
The Zone assigned to EXTRA SP1/EXTRA SP2 can
be selected from Zone2 or Zone3.
7ch +FRONT Enables the normal 7-channel speakers and external
front speakers (☞p. 24).
7ch +FPR Enables the normal 7-channel speakers and external
front presence speakers (☞p. 24).
7ch +FPR+1ZONE Enables the normal 7-channel speakers, external front
presence speakers and zone speakers (☞p. 25).
The Zone assigned to EXTRA SP1 can be selected
from Zone2 or Zone3.
7ch +RPR Enables the normal 7-channel speakers and external
rear presence speakers (☞p. 25).
7ch +FPR+RPR Enables the normal 7-channel speakers, and external
front and rear presence speakers (☞p. 25).
7ch
+FPR+RPR+1ZONE
Enables the normal 7-channel speakers, external front
and rear presence speakers and zone speakers
(☞p. 26).
The Zone assigned to EXTRA SP1 can be selected
from Zone2 or Zone3.
5chBI-AMP Enables the bi-amp connection (☞p. 18).
5chBI-AMP +FPR Enables the bi-amp connection and external presence
speakers (☞p. 26).
5chBI-AMP +SB Enables the bi-amp connection and external surround
back speakers (☞p. 26).
5chBI-AMP
+SB+FPR
Enables the bi-amp connection, external surround
back and front presence speakers (☞p. 27).
5chBI-AMP
+FPR+RPR
Enables the bi-amp connection, external front and rear
presence speakers (☞p. 27).
In the “Configuration,” you can select the speaker size
characteristic (Large or Small). Select the size (sound
reproduction capacity) that matches your speakers.
When speaker size is set to “Small,” low-frequency components
of the speakers that you configured are produced from the
subwoofer (or from the front speakers if there is no subwoofer).
Large Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
Small (Default) Select this for small speakers. The subwoofer will
produce front channel low-frequency components.
The crossover frequency can be selected from 40Hz,
60Hz, 80Hz (Default), 90Hz, 100Hz, 110Hz, 120Hz,
160Hz, or 200Hz. All frequencies below the selected
frequency will be sent to the subwoofer.
Woofer diameter
• 6-1/4 in (16 cm) or larger → Large
• 6-1/4 in (16 cm) or smaller → Small
J
1 : When “Subwoofer1” and “Subwoofer2” are set to “None,” you can only choose
“Large.” If the front speaker setting is “Small” and you change “Subwoofer1”
and “Subwoofer2” to “None,” it will automatically change to “Large.”

Yamaha RX-A3000 Specifications

General

Brand	Yamaha
Model	RX-A3000
Category	Receiver
Language	English