Yamaha XF50W - Equipment Preparation

IMPORTANT INFORMATION
GEN
INFO
#^
(^E
<D
Vo.
;**
EAS00021
EQUIPMENT PREPARATION
Push Rivet (Push type)
Assembly status of the push rivet(push type).
Dissembling
1. Press center pin1 inward to release the
lock.
2. Remove the push rivet main body2.
Assembling
1. Restore the center pin, replace the push
rivet main body.
2. Push in the center pin until leveling off with
the surface position of the push rivet main
body.
1-6
Downloaded from www.ScooterTime.net