Yamaha XF50W - Removing the Handlebar; Checking the Handlebar

HANDLEBAR
CHAS (3^3^)
EAS00666
REMOVING THE HANDLEBAR
1. Stand the scooter on a level surface.
w
Securely support the scooter so that there
is no danger of it falling over.
2. Remove:
8handlebar switch(right)1
8throttle grip assembly2
NOTE:
While removing the handlebar holder assembly
(right), pull back the rubber cover.
3. Remove:
8handlebar switch(left)
8handlebar grip 1
8handlebar upper holder
NOTE:
Blow compressed air between the handlebar and
the handlebar grip, and gradually push the grip
off the handlebar.
EAS00668
CHECKING THE HANDLEBAR
1. Check:
•handlebar©
Bends/cracks/damage -» Replace.
Do not attempt to straighten a bent
handlebar as this may dangerously weaken
it.
4-29
Downloaded from www.ScooterTime.net