YASKAWA E-7 Series User Manual

3.2 Operating Procedures for Utility Functions
3.2.36 JOG Speed Table Edit/Save (FnB05)
3-119
3
Utility Functions
Saving JOG Speed Tables
The operating procedure for saving JOG speed tables is shown below.
4
Press the key to move the cur-
sor to the setting side of the table.
5
Move the cursor with the
keys, and change the JOG speed
setting with the keys.*
6
On pressing the key, the setting
is entered and the cursor returns to
the JOG speed table number side.
7
Repeat steps 3 to 6 to set the JOG speed table. On completing the set-
ting of all the JOG speed tables to be used, save the JOG speed tables
to flash memory by following the procedure in Saving JOG Speed
Tables on page 3-119.
* If setting is attempted in an operation prohibited state, it will not be possible to
change the setting. In this case, make the setting again by referring to Preparation
on page 3-118.
Step Operation Result
1
Display the JOG speed table editing
screen.
2
Press the key to view the
JOG speed table save screen.
Continued on next page.
Continued from previous page.
Step Operation Result
㹀㹀ࠉࠉࠉࠉࠉ㹈㹱㹮㹢㹃㹢㹧㹲
㹈㹑㹎㹂㸮㸮㸰㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸱㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸲㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸳㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹀㹀ࠉࠉࠉࠉࠉ㹈㹱㹮㹢㹃㹢㹧㹲
㹈㹑㹎㹂㸮㸮㸰㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸱㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸲㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸳㸻㸯㸰㸱㸲㸳㸴㸵㸶
㹀㹀ࠉࠉࠉࠉࠉ㹈㹱㹮㹢㹃㹢㹧㹲
㹈㹑㹎㹂㸮㸮㸰㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸱㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸲㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸳㸻㸯㸰㸱㸲㸳㸴㸵㸶
㹀㹀ࠉࠉࠉࠉࠉ㹈㹱㹮㹢㹃㹢㹧㹲
㹈㹑㹎㹂㸮㸮㸰㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸱㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸲㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹈㹑㹎㹂㸮㸮㸳㸻㸮㸮㸮㸮㸯㸮㸮㸮
㹀㹀ࠉࠉࠉࠉࠉ㹈㹱㹮㹢㹃㹢㹧㹲
㹑㹒㹍㹐㹃ࠉ㹈㹑㹎㹂ࠉ㹒㸿㹀㹊㹃㸽
ࠉࠉ㹁㸿㹌㹁㹃㹊ࠉ㹑㹒㹍㹐㹃

YASKAWA E-7 Series Specifications

General

Brand	YASKAWA
Model	E-7 Series
Category	Servo Drives
Language	English