2.9 n: Special Adjustments
YASKAWA ELECTRIC TOEP C710687 03B FSDrive-MV1000 Parameter Guide 231
u n9: I/O Voltage Detection
n n9-02: Output Current Detection Gain
Sets the gain for adjusting the output current detection value in 0.0001 units.
n
n9-70: Output Voltage Detection Gain
Sets the gain for adjusting the output voltage detection value in 0.0001 units.
n
n9-71: Input Current Conversion Coefficient
Sets the input current conversion coefficient in 0.0001 units.
n
n9-72: Input Voltage Detection Gain
Sets the gain for adjusting the input voltage detection value in 0.0001 units.
No.
<1> For details on the default settings, refer to Defaults by Drive Model Selection (o2-04) on page 87.
Name Setting Range Default
n9-02 Output Current Detection Gain 0.0001 to 2.0000 Determined by o2-04 <1>
No. Name Setting Range Default
n9-70 Output Voltage Detection Gain 0.0000 to 2.0000 1.0000
No.
<1> For details on the default settings, refer to Defaults by Drive Model Selection (o2-04) on page 87.
Name Setting Range Default
n9-71 Input Current Conversion Coefficient 0.0000 to 6.5535 Determined by o2-04 <1>
No. Name Setting Range Default
n9-72 Input Voltage Detection Gain 0.0000 to 2.0000 1.0000
MV1000ParameterGuide_E_conditional.book 231 ページ ２０１３年１０月１１日 金曜日 午後８時１８分
To Next Page
Loading...
