YASKAWA FSDrive-MV1000 - 1.4 Control Mode Dependent Parameter Default Values; A1-02 (Motor 1 Control Mode) Dependent Parameters

84 YASKAWA ELECTRIC TOEP C710687 03B FSDrive-MV1000 Parameter Guide
1.4 Control Mode Dependent Parameter Default Values
1.4 Control Mode Dependent Parameter Default Values
The tables below list the parameters that depend on the control mode selection (A1-02 for motor 1, E3-01 for motor 2).
Changing the control mode initializes these parameters to the values shown here.
u A1-02 (Motor 1 Control Mode) Dependent Parameters
Table 1.2 A1-02 (Motor 1 Control Mode) Dependent Parameters and Default Values
No. Name Setting Range Resolution
Control Modes (A1-02)
V/f (0) OLV (2) CLV (3)
A3-01 Trace Data 01 0 to 899 – 101 101 101
A3-02 Trace Data 02 0 to 899 – 102 102 102
A3-03 Trace Data 03 0 to 899 – 103 103 103
A3-04 Trace Data 04 0 to 899 – 106 105 105
A3-05 Trace Data 05 0 to 899 – 107 106 106
A3-06 Trace Data 06 0 to 899 – 110 107 107
A3-07 Trace Data 07 0 to 899 – 111 109 109
A3-08 Trace Data 08 0 to 899 – 112 110 110
A3-09 Trace Data 09 0 to 899 – 113 111 111
A3-10 Trace Data 10 0 to 899 – 116 112 112
A3-11 Trace Data 11 0 to 899 – 149 113 113
A3-12 Trace Data 12 0 to 899 – 152 116 116
A3-13 Trace Data 13 0 to 899 – 154 149 149
A3-14 Trace Data 14 0 to 899 – 408 152 152
A3-15 Trace Data 15 0 to 899 – 416 154 154
A3-16 Trace Data 16 0 to 899 – 418 408 408
A3-17 Trace Data 17 0 to 899 – 419 416 416
A3-18 Trace Data 18 0 to 899 – 421 418 418
A3-19 Trace Data 19 0 to 899 – 601 419 419
A3-20 Trace Data 20 0 to 899 – 618 421 421
A3-21 Trace Data 21 0 to 899 – 000 601 601
A3-22 Trace Data 22 0 to 899 – 000 602 602
A3-23 Trace Data 23 0 to 899 – 000 605 603
A3-24 Trace Data 24 0 to 899 – 000 606 604
A3-25 Trace Data 25 0 to 899 – 000 607 605
A3-26 Trace Data 26 0 to 899 – 000 608 606
A3-27 Trace Data 27 0 to 899 – 000 618 607
A3-28 Trace Data 28 0 to 899 – 000 000 608
A3-29 Trace Data 29 0 to 899 – 000 000 618
A3-30 Trace Data 30 0 to 899 – 000 000 000
A3-31 Trace Data 31 0 to 899 – 000 000 000
A3-32 Trace Data 32 0 to 899 – 000 000 000
b2-01
Zero Speed Level (DC Injection Braking
Start Frequency)
<36>
0.0 to 10.0 0.1 0.5 Hz 0.5 Hz 0.5 Hz
b2-04 DC Injection Braking Time at Stop 0.00 to 10.00 0.01 s 0.50 0.50 0.50
b3-01 Speed Search Selection at Start 0 to 1 – 0 0 –
b3-02 Speed Search Deactivation Current 0 to 200 1% 70 30 –
b5-15 PID Sleep Function Start Level 0.0 to 120.0 <20> 0.1 0.0 Hz 0.0 Hz 0.0 Hz
b6-01 Dwell Reference at Start 0.0 to 120.0 0.1 0.0 Hz 0.0 Hz 0.0 Hz
b6-03 Dwell Reference at Stop 0.0 to 120.0 <20> 0.1 0.0 Hz 0.0 Hz 0.0 Hz
C1-11 Accel/Decel Time Switching Frequency 0.0 to 120.0 0.1 0.0 Hz 0.0 Hz 0.0 Hz
C2-01 S-Curve Characteristic at Accel Start 0.00 to 10.00 0.01 s 0.20 0.20 0.20
C3-01 Slip Compensation Gain 0.0 to 2.5 0.1 0.0 1.0 1.0
C3-02 Slip Compensation Primary Delay Time 0 to 10000 1 ms 3000 3000 –
C3-05 Output Voltage Limit Operation Selection 0 to 1 – –
01
C4-01 Torque Compensation Gain 0.00 to 2.50 0.01 1.00 1.00 –
C4-02 Torque Compensation Primary Delay Time 1 0 to 10000 1 ms 200 50 –
MV1000ParameterGuide_E_conditional.book 84 ページ ２０１３年１０月１１日 金曜日 午後８時１８分