YASKAWA FSDrive-MV1000 - Page 97

2.1 A: Initialization
YASKAWA ELECTRIC TOEP C710687 03B FSDrive-MV1000 Parameter Guide 97
Table 2.3 Check to see if A1-02 is locked (continuing from step 10 above)
Table 2.4 Enter the Password to Unlock Parameters (continuing from step 2 above)
10 The display automatically returns to the display shown in step 6.
Step Display/Result
1
Press to display A1-02.
“02” flashes
2
Press , making sure that the settings cannot be changed.
3
Press to return to the first display.
Step Display/Result
1
Scroll to the right by pressing .
2
Select the flashing digits by pressing .
“00” flashes
3
Press to display A1-04, then press .
4
Press or to enter the password.
5
Press to save what was entered.
6 The drive returns to the parameter display.
7
Press to display A1-02.
8
Press to display the value set in A1-02. If the first “0” blinks, the parameter settings are
unlocked.
Step Display/Result
←→
-PRMSET-
A1- 05 = 1234
(0~9999)
“0”
PRG
Select Password
FWD
←→
-PRMSET- PRG
Control Method
FWD
A1-02= 2
∗2∗
Open Loop Vector
HELP
- MODE - PRG
DATA
Programming
FWD
←→
-PRMSET-
Initialization
Select Language
PRG
FWD
A1-00=0
←→
-PRMSET-
Select Language
English
PRG
FWD
A1-00=0 ∗0∗
←→
-PRMSET-
A1- 04 = 0
(0~9999)
“0”
PRG
Enter Password
FWD
←→
-PRMSET-
A1- 04 = 1234
(0~9999)
“0”
PRG
Enter Password
FWD
Entry Accepted
←→
-PRMSET-
A1- 04 = 0
(0~9999)
“0”
PRG
Enter Password
FWD
←→
-PRMSET- PRG
Control Method
FWD
A1-02= 2
∗2∗
Open Loop Vector
←→
-PRMSET- PRG
Control Method
FWD
A1-02= 2
∗2∗
Open Loop Vector
MV1000ParameterGuide_E_conditional.book 97 ページ ２０１３年１０月１１日 金曜日 午後８時１８分