22 YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions
1.1 Section Safety
1.1 Section Safety
Electrical Shock Hazard
If any parts in the drive are damaged or missing, stop the drive and contact your Yaskawa representative or the nearest
Yaskawa sales office.
Electrical circuits could fail when current is applied, resulting in death, serious injury, or fire.
Observe proper electrostatic discharge procedures (ESD) when handling the drive.
Failure to comply may result in ESD damage to the drive circuitry.
A motor connected to a PWM drive may operate at a higher temperature than a motor being run with a commercial
power supply and its operating speed range may be reduced due to the motor is cooling capacity.
Check in advance that the drive is suited to the load of the motor to be used.
To Next Page
Loading...
