YASKAWA FSDrive-MV1000 - Navigating the Drive and Programming Modes

4.3 The Drive and Programming Modes
84 YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions
◆ Navigating the Drive and Programming Modes
The drive is set to operate in Drive Mode when it is first powered up. Switch between display screens by using the
and keys.
Power Up
Frequency Reference
Default Setting
This display screen allows the user to monitor and change the frequency reference. For
information on how to change the frequency setting value, The Drive and Programming
Modes on page 83.
Note: The user can select the data displayed when the drive is first powered up with
parameter o1-02.
Drive Mode
Monitor Display
Lists the monitor parameters (U- parameters) available in the drive.
Programming
Mode
Verify Menu
Lists all parameters that have been edited or changed from default settings.
Verifying Parameter Changes: Verify Menu on page 87
Setup Group
Lists parameters necessary to get the drive operating quickly.
Simplified Setup Using the Setup Group on page 86
Parameter Setting
Mode
Allows the user to access and edit all parameter settings.
Setup Group Parameters on page 89
Auto-Tuning Mode
Motor parameters are calculated and set automatically.
Auto-Tuning on page 94
Drive Mode
Frequency
Reference
Returns to the frequency reference display screen.
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
DRV
FREF(OPR)
Rdy
JOG FWD FWD/REV
LSEQ
LREF
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
DRV
Monitor Menu
Rdy
JOG FWD FWD/REV
LSEQ
LREF
- MODE - PRG
Modified Consts
HELP DATA
FWD
Modified
X Parameters
HELP
- MODE - PRG
Quick Setting
DATA
FWD
HELP
- MODE - PRG
DATA
Programming
FWD
HELP
- MODE - PRG
Auto-Tuning
DATA
AUTO
FWD
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
DRV
FREF(OPR)
Rdy
JOG FWD FWD/REV
LSEQ
LREF