YASKAWA FSDrive-MV1000 - Menu Structure for Digital Operator

4.2 Using the Digital Operator
82 YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions
◆ Menu Structure for Digital Operator
Figure 4. 5
Figure 4.5 Digital Operator Menu and Screen Structure
<1> Pressing will start the motor.
<2> The drive cannot operate the motor.
<3> Flashing characters are shown as .
<4> X characters are shown in this manual. The Digital Operator will display the actual setting values.
<5> The frequency reference appears after the initial display which shows the product name.
<6> The information that appears on the display will vary depending on the drive.
YA S K A W A
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
DRV
FREF (OPR)
Rdy
-MONITR-
FREF 䋨d1-01䋩
U1-01= 000.00Hz
㧔0.00㨪60.00㧕
0.00Hz
DRV
←→
FWD
Rdy
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
DRV
Monitor Menu
Rdy
- MODE - PRG
Modified Consts
HELP
HELP
DATA
- MODE - PRG
Quick Setting
DATA
HELP
- MODE - PRG
Auto-Tuning
DATA
HELP
- MODE - PRG
DATA
Programming
AUTO
-MONITR-
U1 -01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
DRV
Monitor
JOG FWD FWD/REV
Rdy
-MONITR-
U1- 01 = 0.00Hz
U1-02= 0.00Hz
U1-03= 0.0A
DRV
Frequency Ref
JOG FWD FWD/REV
Rdy
-MONITR-
U1- 02 = 0.00Hz
U1-03= 0.0A
U1-04= 0
DRV
Output Freq
JOG FWD FWD/REV
Rdy
-MONITR-
U2 -01= oC
U2-02= oPr
U2-03= 0.00Hz
DRV
Fault Trace
JOG FWD FWD/REV
Rdy
JOG FWD FWD/REV
JOG FWD
FWD
FWD
FWD
FWD
FWD/REV
Modified
X Parameters
Drive modeProgramming mode
LSEQ
LREF
LSEQ
LREF
LSEQ
LREF
LSEQ
LREF
LSEQ
LREF
MV1000
XXXXV, X.X/X.XkW
XX.XX/XX.XXA
<XXXXXXXXX>
LSEQ
LREF
Initial screen <5>
MV1000
<1>
<2>
<3>
<4>
<6>
RUN
0