3.9 Wiring Check
YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions 75
3.9 Wiring Check
◆ Checks
After wiring work, check that all wiring has been completed. Do not perform a buzzer check on control circuits. Confirm
the following items.
• All wiring is correct.
• No foreign matter such as wire chips or unnecessary screws remain.
• There are no loose screws. (If there are, tighten them.)
• No wire ends have contact with terminals other than the ones they are connected to.
• The terminal numbers and cable lead names match up.
To Next Page
Loading...
