2.6 Install the Keypad in a Control Panel or Another Device
42 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
A - Keypad
B - M3 screws
C - Enclosure panel
D - Screw mounting hole
Figure 2.13 Mount to the Outside of Control Panel
4. Use the remote control extension cable to connect the keypad to the drive.
A - Remote control extension
B - Communications connector
C - Drive
D - Keypad
E - Cable connector
Figure 2.14 Connect the Drive and Keypad with the Remote Control Extension Cable
■ Install Inside Control Panel
To attach the keypad inside of the control panel, you must purchase the installation support set, which is sold
separately. Contact Yaskawa or your nearest sales representative to order mounting brackets and mounting hardware.
Note:
• The installation procedure and panel cut-out dimensions are the same for mounting brackets A and B.
• Use a gasket between the control panel and the keypad in environments with a large quantity of dust or other unwanted airborne material.
To Next Page
Loading...
