YASKAWA HV600

4.4 Keypad Operation
146 YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back), and then push to show [Home].
2. Push (Menu).
3. Push or to select [Parameter Backup/Restore], then push .
4. Push or to select the items to back up, then push .
5. Push or to select [Backup (drive → keypad)], then push .
6. Push or to select a memory location, then push .
The keypad shows “End” when the backup procedure completes successfully.
◆ Write Backed-up Parameters to the Bypass
You can back up parameters on the keypad and write them to different bypasses.
Note:
• Always stop the bypass before you start to restore the parameter backups.
• The bypass will not accept a Run command while it restores parameters.