YASKAWA HV600 User Manual

Parameter Details
5
5.10 o: Keypad-Related Settings
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference 355
Table 5.51 Displays for More than One Status
Keypad Display Description
When the keypad must show an alarm and message at the
same time, it will toggle the second and third lines each 2 s.
When the keypad must show an Information Text only on
the second line and an alarm at the same time, it will toggle
the second line each 2 s.
When the keypad must show an Information Text only on
the second line and a message at the same time, it will
toggle the second line each 2 s.
When the keypad must show an Information Text and
message at the same time, it will toggle the second and third
lines each 2 s.
When the keypad must show an alarm, Information Text,
and message at the same time, it will toggle the second and
third lines each 2 s.
■ o1-03: Frequency Display Unit Selection
No.
(Hex.)
Name Description
Default
(Range)
o1-03
(0502)
Frequency Display Unit
Selection
Sets the display units for the frequency reference and output frequency. 0
(0 - 3)

YASKAWA HV600 Specifications

General

Category	DC Drives
Series	HV600
Overload Capacity	150% for 60 seconds
Output Voltage	0 - Input Voltage
Enclosure	NEMA 1, NEMA 12
Communication	Ethernet/IP, Modbus, DeviceNet, Profibus
Safety	Safe Torque Off (STO)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Control Method	Vector Control