5 Installation and Start-up of Application Program
5.1 Installation of Application Program in Maintenance Mode
5-3
HW1484528
HW1484528
2. List
Select the submenu {FILE LIST}. Then, the list of the application files
which already exist in the YRC1000micro appears.
3. Deletion of application program
By the submenu {DELETE}, the application file which already exists in
the YRC1000micro can be deleted.
(1) Move the cursor and press [SELECT]. Then, the selection indica-
tor “ ” appears on the left of the application file name. Press
[SELECT] again to clear “ ”.
(2) Press [ENTER], then the following confirmation dialog box
appears.
To Next Page
Loading...
