5 Installation and Start-up of Application Program
5.1 Installation of Application Program in Maintenance Mode
5-4
HW1484528
HW1484528
4. MotoPlus function setting
When selecting “MotoPlus FUNC. SETTING”, the following windows
appear to enable or disable the autostart of the MotoPlus application
program. For the detailed usage methods, refer to chapter 5.2 “Start-
up of Application Program” and chapter 5.3 “To Temporarily Prevent
MotoPlus Application from Starting” .
(1) Move the cursor and press [SELECT]. The setting is changed
from “ENABLE” to “DISABLE”.
(2) Press [ENTER], and then the confirmation dialog box appears.
To Next Page
Loading...
