Configuring Basic Features
91
3. Select the desired value from the pull-down list of Backlight Active Level.
4. Click Confirm to accept the change.
To configure the backlight via phone user interface:
1. Press Menu->Basic->Display->Backlight.
2. Press or , or the Switch soft key to select the desired level from the Backlight
Active Level field.
3. Press or , or the Switch soft key to select the desired value from the Inactive
Level field.
4. Press the Save soft key to accept the change.
Bluetooth
Bluetooth enables low-bandwidth wireless connections within a range of 10 meters (32 feet).
The best performance is in 1 to 2 meter (3 to 6 feet) range. You can activate/deactivate the
Bluetooth mode and then pair and connect the Bluetooth headset with your phone. It is only
applicable to T48G/T46G Skype for Business phones.
You can personalize the Bluetooth device name for the Skype for Business phone. The
pre-configured Bluetooth device name will display in scanning list of other devices. It is helpful
for the other Bluetooth devices to identify and pair with your Skype for Business phone.
Note
Procedure
Bluetooth mode can be configured using the configuration files or locally.
Configure Bluetooth mode.
Parameter:
features.bluetooth_enable
To use this feature onT48G/T46G Skype for Business phones, make sure the Bluetooth USB
dongle is properly connected to the USB port on the back of the phone.