Yealink T46G

Configuring Basic Features
105
7. Click Confirm to accept the change.
To configure the SNTP settings via phone user interface:
1. Press Menu->Basic->Date & Time->General->SNTP Settings.
2. Press or , or the Switch soft key to select the time zone that applies to your area
from the Time Zone field.
The default time zone is "GMT+8".
3. Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP Server2
field respectively.
4. Press or , or the Switch soft key to select automatic, enabled and disabled from the
Daylight Saving field.
5. Press or , or the Switch soft key to select the desired location from the Location
field.
6. Press the Save soft key to accept the change.
Time and Date Settings
You can set the time and date manually when Skype for Business phones cannot obtain the time
and date from the NTP time server. The time and date display can use one of several different
formats.
Procedure
Time and date can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the time and date
manually.
Parameter:
local_time.manual_time_enable
Configure the time and date formats.
Parameters:
local_time.time_format
local_time.date_format
Local
Web User Interface
Configure the time and date
manually.
Configure the time and date formats.
Navigate to:
http://<phoneIPAddress>/servlet?p
=settings-datetime&q=load
Phone User Interface
Configure the time and date
manually.