Yealink T46G

Getting Started
15
For T42G/T41P/T40P Skype for Business phones:
Note
Connecting the Power and Network
AC Power (Optional)
To connect the AC power and network:
1. Connect the DC plug of the power adapter to the DC5V port on the Skype for Business
phone and connect the other end of the power adapter into an electrical power outlet.
2. Connect the included or a standard Ethernet cable between the Internet port on the Skype
for Business phone and the one on the wall or switch/hub device port.
Note
Wireless headset adapter EHS36 or Bluetooth USB dongle BT40 should be purchased separately.
For more information on how to use the EHS36 on the phone, refer to Yealink EHS36 User Guide
.
Bluetooth USB dongle BT40 can only be used on the T48G/T46G Skype for Business phones
. For
more information on how to use the Bluetooth on T48G/T46G Skype for Business phones, refer
to Yealink Bluetooth USB Dongle BT40 User Guide .
The EXT port on T48G/T46G Skype for Business phones can also be used to connect the
expansion module EXP40.
The Skype for Business phone should be used with Yealink original power adapter only. The use
of the third-party power adapter may cause the damage to the phone.